Atlas CW Slitter 5400 Series

The Atlas CW Slitter 5400 Series provides intermediate slitting solution which is available in web widths from 4.2 to 5.4 metres (165 - 212in).

This slitter rewinder is part of a proven platform which delivers higher efficiency, more productivity, higher quality rewind reels, reduced noise levels and more effective operator control systems. 

The compact design of this slitter rewinder is harmonised with the larger Atlas CW Slitter 1040 primary slitter rewinder and features an improved web path configuration. The electrical control cabinets are fully integrated inside the slitter, which reduces the space required for installation and removes the need for floor trenches.

Control of the Atlas CW Slitter 5400 is managed through touchscreen interface and the latest industrial grade computers using process logic controllers (PLC) including a PLC for the safety systems. 

One fully integrated HMI master control screen simplifies operation of the machine and is ergonomically panel mounted.

In addition, every roller on each Atlas Machine is individually driven using high efficiency motors. 

Watch the Atlas CW Slitter 5400 in Action

Technical Data

Web Width from 4200mm / 165" to 5400mm / 213"
Standard Unwind Diameter 1500mm / 59"
Standard Rewind Diameter 1200mm / 47"
Option 1500mm / 59"
Speed 1000m/min / 3300ft/min
Option 1200m/min. /3940ft/min
Minimum Slit Width 200mm / 8"
Maximum Slit Width 4500mm / 177"

STANDARD FEATURES
 

  • AUTOMATIC BLUETOOTH WIRELESS REWIND ARM POSITIONING

  • DIRECT LINEAR ACTING CONTACT ROLLS

  • LINEAR TENSION ISOLATION ROLLER FOR PRECISE WEB TENSION

  • HIGH EFFICIENCY HYDRAULIC SYSTEM

  • SLITTING IN GROOVE TO A MINIMUM WIDTH OF 200MM

  • AUTOMATIC PICK AND PLACE KNIFE POSITIONING

  • WEB THREADING SYSTEM

  • INTEGRATED FAULT DIAGNOSTICS WITH REMOTE INTERNET ACCESS

  • REWIND anti-STATIC CONTROL SYSTEM

  • INDIVIDUAL DIRECT DRIVEN CARBON FIBRE ROLLERS

  • Vacuum Trim removal

OPTIONAL FEATURES

 

  • CHOICE OF NARROW (1000KG), STANDARD (2500KG) & HEAVY DUTY (5000KG) REWIND ARMS

  • Slitting in groove

  • EXTERNAL EDGE TRIM WINDERS

  • Additional anti-static control bars

  • 200mm minimum slit width

  • 1200m/min (4000ft/min) Operating speed

  • External trim spoolers

  • Motorised unload trolleys

  • horizontal splice Table

  • Cork / EDPM roller finishes available

  • CE SAFETY COMPLIANCE

Web Path of Atlas CW Slitter 5400

1 Unwind Section
THE UNWIND STATION INCORPORATES REGENERATIVE MOTORS TO REDUCE ENERGY CONSUMPTION. CORE LIFTED FOR OPTIMUM CHUCKING WHILST LOADING.

2 Human Machine Interface (HMI)
ONE FULLY INTEGRATED MASTER CONTROL SCREEN IS MOUNTED ERGONOMICALLY the machine WHICH SIMPLIFIES OPERATION WITH SATELLITE SCREENS POSITIONED AROUND THE MACHINE FOR OPERATOR INTERFACE.

3 Tension Control System
CONSISTS OF TWO FULL DIAMETER INDIVIDUALLY DRIVEN ROLLS, ACTING IN A LINEAR MOTION TO PROVIDE OPTIMUM TENSION CONTROL.

4 Anti-Static Control System
TWO DC PULSE STATIC CONTROL BARS MOUNTED IN THE REWIND SECTION OF THE MACHINE TO REDUCE STATIC CHARGE IN THE INTERNAL AND EXTERNAL REWIND REELS. (TWO ADDITIONAL STATIC CONTROL BARS AVAILABLE AS AN OPTION).

5 Directly Driven Spreader Roll
ALSO KNOWN AS THE BANANA OR BOWED ROLLER. THIS ROLLER ORIENTATES AND PREPARES THE MATERIAL FOR SLITTING ELIMINATING CREASING, WEB EXPANSION AND WRINKLE REMOVING  BEFORE REACHING THE KNIVES.

6 Automatic Knife Positioning
USES THE ATLAS PICK & PLACE SYSTEM FOR SELECTION AND SETTING THE KNIVES IN GROOVE. AUTOMATIC CALIBRATION OF GROOVE ROLL PROVIDES PRECISE BLADE POSITIONING ON EACH SET UP.
AN OPTIONAL CAMERA SHOWS THE POSITION OF THE BLADE IN RELATION TO THE GROOVE WITH THE IMAGE DISPLAYED ON THE MAIN CONTROL SCREEN.

7 Linear Acting Contact Rolls
THE CONTACT ROLL ARMS PROVIDE PRECISE CONTACT CONTROL, WHICH ENABLES HIGHER QUALITY REWIND REELS. CONTACT ROLL PARKING ENABLES REDUCED SET- UP TIME AND INCREASED PRODUCTIVITY.

8 BlueTooth Wireless Rewind Arm Positioning
INDUSTRIAL BLUETOOTH TECHNOLOGY PROVIDES SPEED CONTROL, TENSION AND PRECISE ARM POSITIONING CONTROL.
THIS ELIMINATES THE NEED FOR CONTROL CABLING.
POWER IS PROVIDED BY A DC BUS-BAR LOCATED UNDER THE REWIND BEAMS.

9 Rewind Arms
THREE TYPES OF REWIND ARMS ARE AVAILABLE FOR SLIT WIDTHS AS NARROW AS 200MM WITH HEAVY-DUTY ARMS FOR WIDER REELS AND REWIND DIAMETERS UP TO 1500MM.
A SINGLE DRIVE BELT ON THE REWIND ARM IMPROVES RELIABILITY AND PROVIDES OPTIMUM TORQUE AT CHUCKS.
THE REWIND MOTORS HAVE TORQUE CHARACTERISTICS WHICH INCREASE EFFICIENCY AND PRODUCTIVITY.

10 Drive Control Panels
THE ELECTRICAL CONTROL PANELS ARE AIR-CONDITIONED AND FULLY INTEGRATED INSIDE THE SLITTER WHICH REDUCES THE SPACE REQUIRED FOR INSTALLATION AND REDUCES THE OVERALL MACHINE FOOTPRINT.

11 Trim Winder (Optional)
CORELESS OSCILLATING DESIGN TO EFFICIENTLY WIND AND COLLECT THE EDGE TRIM DURING SLITTING MACHINE PROCESSES.

Flexible Films

Atlas CW Slitter 5400
Atlas CW Slitter 3600
Atlas CW Slitter 500
Atlas CW Slitter 800
Atlas CW Slitter 1040